• Integrated PCI (Parallel ATA)
  • Provides two PCI bus master channels for up to four UDMA IDE devices
  • Support for UDMA 100/66/33 IDE/ATAPI devices

• Integrated Serial ATA Host Controllers:
  • Provides independent DMA operation on 2 ports
  • Data transfer rates up to 150MB/s
  • Supports RAID 0, 1 (with 82801ER/ICH5R chip)
  • Note: Maximum number of IDE devices supported with any combination of Integrated IDE and SATA IDE is four devices. For example: 2 SATA and 2 P-ATA (total = 4)
• BIOS:
  • AMI® BIOS 8.0 on 4 Mbit Flash ROM
  • LAN remote boot (PXE) & SMBIOS v2.3 support
  • BIOS Boot Specification v3.1 (BBS) support
  • Auto configuration of IDE hard drive types

• Server Management:
  • QLogicâ„¢ Zircon Baseboard Management Controller (BMC) based on powerful ARM7
  • Tailored for IPMI highest 1.5 Spec.
  • Supports KCS and BT styles
  • Supports flexible Windows and Linux based

    Management Solution

  • Supports RMCP and SNMP protocols
  • Supports ASF standard and EMP
  • I2C serial multi-master controllers and UARTs
  • Built-in IPMB connector
  • Supports remote Power on/off & reset support

    (IPMI over LAN); SMDC via built-in 2×25 header

• System Management:
  • Total of nine 3-pin fan headers
  • Six fan headers with tachometer monitoring
  • One 2-pin chassis intrusion header
  • Temperature, voltage, and fan monitoring
  • Watchdog time

S2735-8M Motherboard Specifications

• Model:
  • Tyan Tiger I7501R S2735G3NR-8M Motherboard

• Processor Support:
  • Dual mPGA604 ZIF sockets
  • Supports up to two Intel® Xeon® processors with 512K L2 cache 533MHz, 400MHz FSB and 1MB L3 cache 533MHz FSB
  • Onboard 4-phase VRM (VRM 9.1 spec)
  • Front-Side Bus support for 533/400MHz

• Chipset:
  • Intel® E7501 server chipset
  • MCH + ICH5R + P64H2 + FWH
  • Intel® P64H2 supports two PCI(-X) buses
  • Winbondâ„¢ W83627HF Super I/O chip
  • Winbondâ„¢ W83782D hardware monitoring chip
• FSB:
  • 533/400MHz
• Memory:
  • Six 184-pin 2.5V DDR DIMM sockets
  • Supports up to 12GB of Registered DDR266/200
  • Dual channel memory bus
  • Supports Registered memory only
  • Supports ECC type memory modules

• Expansion Slots:
  • Three independent PCI/PCI-X buses
  • Two 32-bit 33MHz (5V) PCI slots
  • Two 64-bit 133/100/66MHz (3.3V) PCI-X slots
• On-Board Video:
  • ATI® Rageâ„¢ XL PCI graphics controller
  • 8MB Frame Buffer of video memory

• On-Board LAN:
  • Intel® 82546EB dual-channel Gigabit Ethernet controller (Default configuration)
  • Two RJ-45 LAN connectors with LEDs connected to an independent PCI-X bus
  • Two LAN LED headers for external LED output
  • Intel® 82551QM Fast Ethernet controller
  • One RJ-45 LAN connector with LEDs
  • One LAN LED header for external LED output
• Regulatory:
  • FCC Class B (Declaration of Conformity)
  • European Community CE

• Form Factor:
  • ATX footprint (12″ x 10.0″; 304.8mm x 254mm)
  • EPS12V power connector